型材四面貼膜機  XCTM-02

Sticking film machine

用途：

USE:

該機主要用于鋁合金型材、塑料型材、不銹鋼型材等表面保護膜包裝；本機采用變頻電機控制型材貼膜速度，通過調整輥輪位置對型材上下左右共四個平面進行粘貼保護膜加工。This machine is mainly used for aluminum alloy, plastic material,such as stainless steel profile surface protective film packaging; this machine usesthe frequency conversion motor control section film speed, by adjusting theposition of roller paste protective film processing to the profile above andbelow a total of four plane.

設備特點：

The machinefeatures：

   型材上粘貼的保護膜平整、設備易操作、易管理；機體外形美觀、使用方便，速度快捷等優點。

Profiles on protective film paste smooth, easy operation,easy management of equipment; the beautiful appearance, convenient use, quickspeed etc..

技術參數：

Technical data:
電 源：220V，50Hz

Power supply: 220V  50Hz
總功 率：750W

Total power：750W

輸送速度：0～280m/min

Transmission speed: 0～280m/min

型材大尺寸：寬×高=200mm×150mm

The maximum size of cross section：width * height = 200mm * 150mm

設備外形尺寸：長×寬×高=1840mm×800mm×1520mm

Host size：Length * width * height =1840mm * 800mm * 1520mm

設備重量：600kg （含料架）

Total weight：600kg（With the rack）