【九本牌】水冷式冷卻機【循環水冷卻機】型號介紹

JBS-9W     JBS-12.W     JBS- 16W     JBS-19W     JBS-25W     JBS-31W     JBS-37W     JBS-47W

JBS-62W    JBS-78W      JBS-93W     JBS-112W    JBS-124W    JBS-140W    JBS-155W    JBS-186W

榮幸為您推薦【九本牌】水冷式冷卻機【循環水冷卻機】_冷凍機_冷卻機_制冷機_冰水機_凍水機_冷凝機_水冷機_風冷式冷水機。

水冷式冷卻機【循環水冷卻機】可分為①水冷式冷水機（設計箱型、柜式、開放式）②風冷式冷水機（設計箱型、柜式）風冷螺桿式冷水機組（箱型、柜式設計）③激光冷水機（箱型設計） ④電鍍-氧化冷水機 ⑤反應釜冷水機⑥水冷螺桿式冷水機組（開放式設計）⑦鍍膜機冷水機⑧低溫型冷水機（-5- -40度）（箱型、柜式、開放式設計）⑨UV固化機、LED冷水機⑩超聲波清洗冷水機

九本制冷教您如何選購冷卻機 ：

▲非啟停式的冷卻機其實是控制制冷機內冷媒流向來控制制冷循環水的溫度。按照制冷機的制造原理，一共分為2種控制方式，在5度以內采用冷媒流向的控制方式，使制冷機可以控制溫度在正負0.1度，在5度以外采用壓縮機啟停方式，使制冷機在不需要強烈制冷的情況下節能工作。基于制冷機的工作方式，對于制冷機的制冷精度要求基本上可以滿足(精度要求高的可以采用冷媒流向的控制方式)。剩下來就是制冷功率和水泵的選型要求了，只要考慮了具體的發熱量，就可以選用不同制冷量的制冷機，然后再看水泵的揚程和流量需求，選擇不同的水泵。這樣就可以找到合適的制冷機了。

▲Non start stop type refrigerator is to control the refrigerant flow in the refrigerator to control the temperature of the cooling water. According to the principle of the refrigerator, is divided into 2 kinds of control mode, control mode using the coolant flow direction within 5 degrees, the cooling machine can accurately control the temperature in the positive and negative 0.1 degrees, 5 degrees in the outside of the compressor start stop mode, the cooling machine without the need for such work under the condition of strong cooling. Based on the working mode of the refrigerator, the refrigeration precision requirement of the refrigerator can basically meet the requirements of high precision and can be controlled by the refrigerant flow direction. The rest is the selection of refrigeration power and pump requirements, as long as the account heat specific, refrigeration machine can choose different cooling capacity, and then look at the pump head and flow requirements, choose a different pump. So we can find the right refrigerator.

水冷式冷卻機【循環水冷卻機】產品簡介：

▲ 性能穩定：采用多個壓縮機并聯使用。每個壓縮機自帶一個獨立的制冷回路。即蒸發器、冷凝器也完全獨立；所有壓縮機由統一的微電腦控制系統指揮，逐個開、關機，相互之間絕不會相互干擾,加上該品牌機全部采用原裝正品制作，單機故障率極低，綜合以上原因，可以保證該系列機有著高度穩定的性能，在長年連續運行情況下之，而無需再購其它備用機。
▲ Performance and stability: the use of multiple parallel compressors,each compressor comes with a separate cooling circuit that is the evaporator and condenser are completely independent; all compressor microcomputer control system by the unified command, to open one by one, off each other will not interfere with each other between, plus the original authentic brand of machine used in all production stand-alone failure rate is very low,the above reasons,we can ensure that the machine has a series of highly stable performance,long years of continuous operation in case the first choice, without having to repurchase another spare machine.

▲ 省電節能：采用多個中小功率壓縮機并聯使用,開、關機時對電網的干擾極小，隨著負荷的變化，機組便自動確定開機的數量，保證開啟的壓縮機處于佳工作狀態，從而有效節約電能。
▲ Energy saving: The number of small and medium power compressors used in parallel, open, shut down the grid when the minimum interference with the load changes, the unit will automatically determine the amount of power to ensure the open state of the compressor work in the most short-tailed bird effectively save energy.

▲ 使用壽命長：蒸發器、冷凝器設計非常合理，并且置于壓縮機上方，在整個運行過程中，絕大部分潤滑油始終停留在壓縮機內，保證壓縮機的良好潤滑。
▲ Long life: evaporator, condenser design is very reasonable, and placed in the top of the compressor, the entire run, the vast majority of oil within the compressor has stopped faint, to ensure good lubrication of the compressor.

冷卻機主要應用行業：

激光技術、焊接、塑料成型、注塑、擠塑、吹瓶、熱力塑型、機械切削加工、非切削加工、鑄造、表面處理、電鍍、電泳、醫療設備、電子行業、電路板生產、電子蕊片制造、化工、造紙、制藥業、食品加工業、鋁型材、鋁合金、鋼化玻璃、鍍膜玻璃生產、超聲波清冼、首飾加工、皮革、皮草加工、油墨生產、養殖業。

▲Box-type air-cooled chiller Main application: laser technology, welding, plastic molding, iniection molding, extrusion,blow molding, thermal modeling, mechanical machining, non-cutting machining, casting, surface treatment, electroplating,electrophoresis, medical equipment , the electronics industry,circuit board production,manufacture of electronic microarrays,chemical, paper, pharmaceutical, food processing,aluminum,aluminum alloy, tempered glass, coated glass production,ultrasonic cleansing, jewelry processing, leather, fur processing,printing ink production and aquaculture.

▲ 此系列機型可定做超低溫型（可低至零下40度）

▲ These models can be custom-made series of ultra-low temperature (as low as minus 40 degrees)

水冷式冷卻機【循環水冷卻機】設備優點 ：

水冷式箱型設計，水箱內置于機組內，底部裝有活動腳輪，外形美觀，可隨意改換安裝的位置及設備，可安放于生產車間內，并具備多段能量調節適用于配套中小型生產設備（此機型需要安裝配備相應的冷卻水塔、冷卻泵）。

Water-cooled tank design, tank built into the unit, the base fitted  with casters, pleasing in appearance, can easily change the location and installation of equipment can be placed in the workshop,and has multi-adjustable for supporting small and medium sized energy production equipment (This model is equipped with a corresponding need to install cooling towers,cooling pumps).

本系列冷水機均采用多機聯用技術，使得冷水機性能更佳。

This series chillers are used in conjunction with multi-machine technology, making the chiller better performance

本公司所有設備已通過：2008 idt GB/T19001-2008標準認證證書；CE認證；請放心購買。

All the equipment of the company has passed IDT GB/T19001-2008 :2008 standard quality management system certification; CE certification; please rest assured to buy.

設備參數表一

設備參數表二

備注：

1.以上參數配置為我公司標準產品配置，如對特殊或非標參數配置，我公司可根據要求定做。

2，制冷量是依據冰水入口溫度12℃，出口溫度7℃；冷卻水進口溫度30℃，出口溫度35℃計算

得出。

3，目錄規格如有變動，恕不另行通知。