武漢格萊莫檢測設備有限公司  

電話：13545068882；027-86619889

傳真：027-86619889  

網址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=628

一、產品簡介
    HVS-50Z型自動轉塔數顯維氏硬度計是光機電一體化的高新技術產品，它具有在測試時壓頭與物鏡自動切換，測試點自動定位。有良好的可靠性，可操作性，是小負荷維氏硬度計的升級換代產品。該機采用計算機軟件編程，高倍率光學測量系統，光電傳感等技術，通過軟鍵輸入，能調節測量光源的強弱，選擇測試方法與硬度對照表、保持時間，文件號與儲存等，在LCD大屏幕顯示屏上能顯示試驗方法、試驗力，測量壓痕長度、硬度值、試驗力保持時間，測量次數，并能鍵入年、月、日期，試驗結果和數據處理等，通過打印機輸出，RS232接口與計算機連網。硬度計適用于測量微小、薄形試件、表面滲鍍層處理后的零件，是科研機構、工廠及質檢部門進行研究和檢測的理想的硬度測試儀器。適用范圍：熱處理、碳化、淬火硬化層，表面覆層，鋼，有色金屬，微小及薄形零件等。
二、技術指標
    ★試驗力：9.8N(1.0Kgf)、49.0N(5.0Kgf)、98.0N(10Kgf)、196N(20Kgf)、294N(30Kgf)、490N(50Kgf)
    ★轉換標尺：洛氏、表面洛氏、布氏
    ★小測量單位：0.025μm
    ★總放大倍數：100X（觀察）200X（測量）
    ★數據輸出：內置打印機和RS-232接口
    ★加荷控制：自動（加荷、保荷、卸荷）
    ★儀器重量：35kg
    ★試件大高度：160mm
    ★電源：AC220V±5%，50~60Hz
    ★執行標準：國家標準(GB/T4340.2 Chinese Standard), JJG151檢定規程 
    ★標準配件 附件：物鏡20x、10x，維氏壓頭，數顯測量目鏡10x，大平試臺、中平試臺、V型試臺、硬度塊 (2)，電源線等



一、產品簡介
One, product introduction
HVS-50Z型自動轉塔數顯維氏硬度計是光機電一體化的高新技術產品，它具有在測試時壓頭與物鏡自動切換，測試點自動定位。有良好的可靠性，可操作性，是小負荷維氏硬度計的升級換代產品。該機采用計算機軟件編程，高倍率光學測量系統，光電傳感等技術，通過軟鍵輸入，能調節測量光源的強弱，選擇測試方法與硬度對照表、保持時間，文件號與儲存等，在LCD大屏幕顯示屏上能顯示試驗方法、試驗力，測量壓痕長度、硬度值、試驗力保持時間，測量次數，并能鍵入年、月、日期，試驗結果和數據處理等，通過打印機輸出，RS232接口與計算機連網。硬度計適用于測量微小、薄形試件、表面滲鍍層處理后的零件，是科研機構、工廠及質檢部門進行研究和檢測的理想的硬度測試儀器。適用范圍：熱處理、碳化、淬火硬化層，表面覆層，鋼，有色金屬，微小及薄形零件等。
HVS-50Z type automatic turret digital Vivtorinox hardness is light mechanical and electrical integration of high-tech products, it has in the test head and the objective lens automatic switching, test point automatic positioning precision. Have good reliability, operability, is a small load Vivtorinox hardness of the upgrading of products. The machine adopts computer software programming, high power optical measurement system, a photoelectric sensing technology, through the soft key input, can adjust the measuring light intensity, select the test method and hardness control table, holding time, file, and store, in LCD large screen display screen capable of displaying test method, test, measurement of indentation length, hardness, test force dwell time, measuring the number of times, and can enter the year, month, date, test result and data processing, output through the printer, the RS232 interface and computer networking. The hardness tester is applicable to measure small, thin specimen, the surface coating after parts, is the scientific research institutions, factories and quality inspection departments to conduct research and detection of the desired hardness testing instrument. Scope of application: heat treatment, carbide, hardening, surface coating, steel, non-ferrous metal, micro and thin shaped components.
二、技術指標
Two, technical indicators
★試驗力：9.8N(1.0Kgf)、49.0N(5.0Kgf)、98.0N(10Kgf)、196N(20Kgf)、294N(30Kgf)、490N(50Kgf)
★test: 9.8N ( 1.0Kgf ), 49.0N ( 5.0Kgf ), 98.0N ( 10Kgf ), 196N ( 20Kgf ), 294N ( 30Kgf ), 490N ( 50Kgf )
★轉換標尺：洛氏、表面洛氏、布氏
★conversion ruler: Rockwell, surface Rockwell, Vickers
★小測量單位：0.025μm
The smallest unit of measurement: 0.025 μ M
★總放大倍數：100X（觀察）200X（測量）
Of the total magnification: 100X ( observation) 200X ( measurement )
★數據輸出：內置打印機和RS-232接口
★data output: built-in printer and RS-232 interface
★加荷控制：自動（加荷、保荷、卸荷）
★loading control: automatic ( loading, and loading, unloading )
★儀器重量：35kg
★the weight of the instrument: 35kg
★試件大高度：160mm
★specimen maximum height: 160mm
★電源：AC220V±5%，50~60Hz
★power: AC220V ± 5%, 50~60Hz
★執行標準：國家標準(GB/T4340.2 Chinese Standard), JJG151檢定規程 
In the implementation of the standards: national standards ( GB/T4340.2 Chinese Standard ), JJG151 verification regulation
★標準配件 附件：物鏡20x、10x，維氏壓頭，數顯測量目鏡10x，大平試臺、中平試臺、V型試臺、硬度塊 (2)，電源線等
★standard accessories: Objective 20x, 10x, Vivtorinox head, digital display measuring eyepiece 10x, flat bench, bench, in V type test, hardness test block ( 2), power line and so on一、產品簡介
One, product introduction
HVS-50Z型自動轉塔數顯維氏硬度計是光機電一體化的高新技術產品，它具有在測試時壓頭與物鏡自動切換，測試點自動定位。有良好的可靠性，可操作性，是小負荷維氏硬度計的升級換代產品。該機采用計算機軟件編程，高倍率光學測量系統，光電傳感等技術，通過軟鍵輸入，能調節測量光源的強弱，選擇測試方法與硬度對照表、保持時間，文件號與儲存等，在LCD大屏幕顯示屏上能顯示試驗方法、試驗力，測量壓痕長度、硬度值、試驗力保持時間，測量次數，并能鍵入年、月、日期，試驗結果和數據處理等，通過打印機輸出，RS232接口與計算機連網。硬度計適用于測量微小、薄形試件、表面滲鍍層處理后的零件，是科研機構、工廠及質檢部門進行研究和檢測的理想的硬度測試儀器。適用范圍：熱處理、碳化、淬火硬化層，表面覆層，鋼，有色金屬，微小及薄形零件等。
HVS-50Z type automatic turret digital Vivtorinox hardness is light mechanical and electrical integration of high-tech products, it has in the test head and the objective lens automatic switching, test point automatic positioning precision. Have good reliability, operability, is a small load Vivtorinox hardness of the upgrading of products. The machine adopts computer software programming, high power optical measurement system, a photoelectric sensing technology, through the soft key input, can adjust the measuring light intensity, select the test method and hardness control table, holding time, file, and store, in LCD large screen display screen capable of displaying test method, test, measurement of indentation length, hardness, test force dwell time, measuring the number of times, and can enter the year, month, date, test result and data processing, output through the printer, the RS232 interface and computer networking. The hardness tester is applicable to measure small, thin specimen, the surface coating after parts, is the scientific research institutions, factories and quality inspection departments to conduct research and detection of the desired hardness testing instrument. Scope of application: heat treatment, carbide, hardening, surface coating, steel, non-ferrous metal, micro and thin shaped components.
二、技術指標
Two, technical indicators
★試驗力：9.8N(1.0Kgf)、49.0N(5.0Kgf)、98.0N(10Kgf)、196N(20Kgf)、294N(30Kgf)、490N(50Kgf)
★test: 9.8N ( 1.0Kgf ), 49.0N ( 5.0Kgf ), 98.0N ( 10Kgf ), 196N ( 20Kgf ), 294N ( 30Kgf ), 490N ( 50Kgf )
★轉換標尺：洛氏、表面洛氏、布氏
★conversion ruler: Rockwell, surface Rockwell, Vickers
★小測量單位：0.025μm
The smallest unit of measurement: 0.025 μ M
★總放大倍數：100X（觀察）200X（測量）
Of the total magnification: 100X ( observation) 200X ( measurement )
★數據輸出：內置打印機和RS-232接口
★data output: built-in printer and RS-232 interface
★加荷控制：自動（加荷、保荷、卸荷）
★loading control: automatic ( loading, and loading, unloading )
★儀器重量：35kg
★the weight of the instrument: 35kg
★試件大高度：160mm
★specimen maximum height: 160mm
★電源：AC220V±5%，50~60Hz
★power: AC220V ± 5%, 50~60Hz
★執行標準：國家標準(GB/T4340.2 Chinese Standard), JJG151檢定規程 
In the implementation of the standards: national standards ( GB/T4340.2 Chinese Standard ), JJG151 verification regulation
★標準配件 附件：物鏡20x、10x，維氏壓頭，數顯測量目鏡10x，大平試臺、中平試臺、V型試臺、硬度塊 (2)，電源線等
★standard accessories: Objective 20x, 10x, Vivtorinox head, digital display measuring eyepiece 10x, flat bench, bench, in V type test, hardness test block ( 2), power line and so on