裝飾材料中的鋁單板，其中有鋁單板吊頂和幕墻鋁單板，今天建威廠家跟大家分享的是鋁單板吊頂施工和室內鋁單板。

The aluminum veneer in decorative materials, including aluminum veneer ceiling and curtain wall aluminum veneer, today what Jian Wei manufacturers want to share with you are the aluminum veneer ceiling construction and indoor aluminum veneer.

鋁單板的施工：1、首先確定施工部位，測量設計標高和實際標高是否相

符。根據確認下來的準確的1M線，在墻面上彈確定后的標高線。

Construction of aluminum veneer: 1. Firstly, the construction site should be determined, and whether the design elevation corresponds to the actual elevation . According to the confirmed accurate 1M line, mark the definite elevation line on the wall surface.

2、吊桿采用鋼筋吊桿，吊桿間距800-1000mm,固定吊桿的膨脹螺栓螺栓應完全拉緊，不能松動。

2. The suspender should be made of reinforced bar, the spacing between boom is 800-1000mm, and the expansion bolt and bolt of the fixed boom shall be fully tensioned and not loose.

3、在安裝龍骨前設置反支撐或轉換層。

. Install the back support or transfer layer before installing the keel.

4、安裝龍骨前，應按設計要求對房間凈高、洞口標高和吊頂內管道、設備及其支架的標高進行交接檢驗。

4, Before installing of the keel, the design requirements of the room clear height, the hole elevation and the ceiling inside the pipes ,equipment and support’s elevation should be transfered and tested.

5、重型燈具及其他重型設備嚴禁安裝在吊頂工程的龍骨上。

5、heavy lamps and other heavy equipment should not be installed on the keel of the ceiling works.

6、安裝孔角龍骨時應起拱，一般為短跨的1/200，墻邊第一根孔角龍骨距墻壁邊緣≤200mm，接頭要錯開，不可與相鄰龍骨接頭在一條直線上，吊桿的方向也要錯開。

6, the installation hole angle keel should be arch, which is usually short span of 1/200, the first hole angle keel from the wall edge is less than or equal to 200mm, the joint should be staggered,should not joint in a straight line with the adjacent keel, the direction is to stagger.

室內鋁單板：

indoor aluminum veneer

1、室內包柱鋁單板弧形優美，色澤均勻，工藝復雜。

1, Indoor column aluminum veneer has arc beautiful, uniform color, complex process.

2、室內幕墻鋁單板色澤均勻，顏色亮麗，，經久。

2、Indoor curtain wall aluminum veneer has uniform and bright color, quality assurance and can stand wear and tear.

3、室內密拼鋁單板無縫拼裝，視覺，質量輕，強度大，剛性強。

Indoor seamless aluminum veneer has seamless assembly, visual perfect, light quality, high strength, strong rigidity.

 佛山建威鋁單板廠家是專業生產和銷售鋁單板，如果您想了解更多鋁單板產品，請點擊登錄建威官網：http://www.fsjwlth.com或咨詢我們的業務經理羅小姐，她的電話/微信：13924844954

Foshan Jian Wei aluminum veneer factory is specialized in the production and sale  aluminum veneer, if you want to know more about the aluminum veneer production, please click on the website: http://www.fsjwlth.com.Or consult our business manager, Miss Luo, on her phone / WeChat: 13924844954