廈門阿米控技術有限公司

產品介紹

吳工18030132582

PlantCruise操作站(HMIWeb)

● 基于霍尼韋爾的HMlWeb技術
● 支持中文界面
● 可視方案圖，控制策略設計圖的實時監視顯示PlantCruise軟件
● 監控軟件提供高速緩存區的實時動態數據存取、趨勢、報警/事件處理、管理、報表報告生成等功能
● 系組態環境PlantCruise組態工作室包括：
◎ 企業模型組態軟件Simplified Enterprise ModeIBuilder，對企業中的資產按分級結構直觀地描述、顯示
◎ 控制策略組態軟件ControI BuiIder，為生成控制策略提供全套控制算法庫
◎ 系統資源組態軟件Quick Builder，用于創建系統硬件
◎ 用戶畫面組態軟件HMIWeb Display BuiIde，用于創建基于HTML格式的操作員圖形界面

● 強大的數據交換功能
● 多種其它應用(Uniformance PHD、eServer、EBM等)PlantCruise仿真控制器(SIM)
● 仿真PlantCruise系統
● 基于PC的仿真控制器環境，無須控制器硬件

 振動傳感器PR6423-000-010 CON21

產品詳情資料

1.CPU模塊

CPU模塊主要由微處理器(CPU芯片)和存儲器組成。在PLC控制系統中，工廠CPU模塊相當于人腦。它不斷地收集輸入信號，執行用戶程序，并刷新系統的輸出；內存用于存儲程序和數據。

2.輸入輸出模塊

輸入模塊和輸出模塊簡稱為I/O模塊。它們是系統的眼睛、耳朵、手和腳，是外部現場設備和CPU模塊之間的橋梁。

輸入模塊用于接收和采集輸入信號，開關輸入模塊用于接收從按鈕；來自選擇開關、數字撥盤開關、限位開關、接近開關、光電開關、壓力繼電器等的開關輸入信號；模擬輸入模塊用于接收電位器、測速發電機和變送器提供的不斷變化的模擬電流和電壓信號。

開關量輸出模塊用于控制接觸器、電磁閥、電磁鐵、指示燈、數顯裝置、報警裝置等輸出設備，模擬量輸出模塊用于控制調節閥、變頻器等執行機構。

CPU模塊的工作電壓一般為5V，而PLC的輸入/輸出信號電壓一般較高，如DC 24V，AC 220V。從外部引入的尖峰電壓和干擾噪聲可能會損壞CPU模塊中的組件或使PLC無法正常工作。在I/O模塊中，采用光耦、光電晶閘管、小繼電器等器件隔離PLC內部電路和外部I/O電路。I/O模塊除了傳輸信號外，還具有電平轉換和隔離的功能。

3.節目編排者

編程器用于生成用戶程序，并使用它來編輯、檢查、修改和監控用戶程序的執行。手持編程器不能直接輸入和編輯梯形圖，只能輸入和編輯指令表程序，所以也叫指令編程器。它體積小，價格便宜。一般用于小型PLC編程或現場調試維護。

利用編程軟件可以在計算機屏幕上直接生成和編輯梯形圖、指令表、功能框圖和順序功能圖程序，并實現不同編程語言的相互轉換。程序編譯完成后，可以到PLC中，也可以將PLC中的程序上傳到計算機中。該程序可保存或打印，并可編程和通過網絡遠程傳輸。

英文產品詳細信息

1. CPU module

The CPU module mainly consists of a microprocessor (CPU chip) and memory. In a PLC control system, the factory CPU module is equivalent to a human brain. It continuously collects input signals, executes user programs, and refreshes the system's output; Memory is used to store programs and data.

2. Input output module

The input module and output module are abbreviated as I/O modules. They are the eyes, ears, hands, and feet of the system, serving as a bridge between external field devices and CPU modules.

The input module is used to receive and collect input signals, and the switch input module is used to receive slave buttons; Switch input signals from selector switches, digital dial switches, limit switches, proximity switches, photoelectric switches, pressure relays, etc; The analog input module is used to receive the constantly changing analog current and voltage signals provided by the potentiometer, tachogenerator and various transmitters.

The switch output module is used to control output devices such as contactors, solenoid valves, electromagnets, indicator lights, digital display devices, alarm devices, etc., while the analog output module is used to control actuator mechanisms such as regulating valves and frequency converters.

The working voltage of the CPU module is generally 5V, while the input/output signal voltage of the PLC is generally higher, such as DC 24V and AC 220V. The spike voltage and interference noise introduced from outside may damage the components in the CPU module or prevent the PLC from working properly. In the I/O module, devices such as optocouplers, optoelectronic thyristors, and small relays are used to isolate the internal and external I/O circuits of the PLC. In addition to transmitting signals, I/O modules also have functions of level conversion and isolation.

3. Program arranger

Programmers are used to generate user programs and use them to edit, inspect, modify, and monitor the execution of user programs. A handheld programmer cannot directly input and edit ladder diagrams, but can only input and edit instruction table programs, so it is also called an instruction programmer. It is small in size and cheap in price. Generally used for small-scale PLC programming or on-site debugging and maintenance.

Programming software can directly generate and edit ladder diagrams, instruction lists, functional block diagrams, and sequential function diagram programs on the computer screen, and achieve mutual conversion between different programming languages. After the program is compiled, it can be uploaded to the PLC or uploaded to the computer. This program can be saved or printed, and can be programmed and transmitted remotely through the network.

       振動傳感器PR6423-000-010 CON21

3500系列組成部分概述：

3500/70M往復壓縮機沖擊/速度監測器

3500/72M 活塞桿位置監測器

3500/77M 汽缸壓力監測器

3500/63 氣體監測器

3500/92 通訊網關

3500/93 LCD 顯示裝置

3500/94 VGA 顯示裝置

3500/95 系統綜合 PC 顯示裝置 

3500/40M Proximitor? 監測器模塊：通道類型-徑向振動、軸向位移、偏心、差脹

3500/42M Proximitor? /位移/速度加速度監測器模塊：通道類型-加速度、速度、軸振動

3500/45 位置監測器模塊：通道類型-軸向位移、差脹、斜面差脹、殼脹、閥門位置

免責聲明：

免責聲明： AMIKON我們銷售新產品和停產產品，渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。