IS220PDIOH1A模塊卡件IS420UCSBH4ADCS系統備件

IS220PDIOH1A模塊卡件IS420UCSBH4ADCS系統備件

                                                      產品詳情資料：

IC698CPE010 是 GE Fanuc RX7i 系列的中央處理器。該設備能夠?qū)崟r(shí)控制工業機械和材料過程。它通過安裝在機架上的 VME64 連接背板與其他設備和模塊進行通信。

IC698CPE010 具有能夠執行浮點計算的 300MHz Celeron 微處理器。每個布爾函數的標準速度是每個線圈 0.33 毫秒。該設備的其他功能包括但不限于以下內容：三個嵌入式串行端口和兩個以太網端口、字內引用支持、符號變量支持、測試編輯模式和網絡數據監控。

該設備有 10 兆字節的 RAM 內存用于數據和編程信息。該內存由 CMOS 電池供電。還提供了額外的 10 兆字節非易失性閃存 (NVRAM)。操作系統固件數據存儲在閃存中。無需拆開設備或更換 EPROM 即可更新固件。

有兩種操作IC698CPE010的方法：三位置運行/停止開關和將設備連接到計算機并運行適當?shù)能浖？梢酝ㄟ^串行端口或以太網端口將此設備連接到計算機。注意：使用以太網端口需要 IP 尋址和 Cat5 電纜。對于串行連接，使用 SNP 協議。對于該設備的配置和編程，在連接的計算機上使用 Proficy Machine Edition PLC-Logic Developer 軟件。配置數據使用密碼保護。

安裝 IC698CPE010 時，請按照產品手冊中的說明進行操作。禁用機架電源。記錄設備的媒體訪問控制 (MAC) 地址。將設備牢固地安裝并接地到機架的第一個插槽，即指定的 CPU 插槽中。連接以太網和串行端口。重新啟用機架的電源。將 CMOS 電池連接到連接器之一。開始對設備進行編程。

                                                    產品英文詳情資料：

IC698CPE010 is the central processing unit of the GE Fanuc RX7i series. This device can control industrial machinery and material processes in real-time. It communicates with other devices and modules through the VME64 connection backplane installed on the rack.

IC698CPE010 has a 300MHz Celeron microprocessor capable of performing floating-point calculations. The standard speed for each Boolean function is 0.33 milliseconds per coil. The other functions of this device include but are not limited to the following: three embedded serial ports and two Ethernet ports, intra word reference support, symbolic variable support, test editing mode, and network data monitoring.

This device has 10 megabytes of RAM memory for data and programming information. This memory is powered by a CMOS battery. An additional 10 megabyte non volatile flash memory (NVRAM) is also provided. The operating system firmware data is stored in flash memory. You don't need to disassemble the device or replace the EPROM to update the firmware.

There are two methods to operate IC698CPE010: a three position run/stop switch and connecting the device to a computer and running appropriate software. This device can be connected to the computer through a serial or Ethernet port. Note: Using Ethernet ports requires IP addressing and Cat5 cables. For serial connections, use the SNP protocol. For the configuration and programming of this device, use the Proficy Machine Edition PLC-Logic Developer software on the connected computer. Configure data to be password protected.

When installing IC698CPE010, please follow the instructions in the product manual. Disable rack power. Record the Media Access Control (MAC) address of the device. Firmly install and ground the equipment to the first slot of the rack, the designated CPU socket. Connect Ethernet and serial ports. Re-enable the power supply to the rack. Connect the CMOS battery to one of the connectors. Start programming the device.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。