產品標題: S200TCEAG1BSFGE DS200TCEAG1B工控DCS系統模塊卡件自動化設備

型號： S200TCEAG1BSFGE

品牌： GE

                                                                              產品詳情資料：

IS200AEADH1ACA IS200AEADH1

模擬輸入數量值的長度為兩個字節。它包含從1到125（含）的值。起始模擬輸入值和模擬輸入數量值之和小于或等于所連接CPU中可用的模擬輸入數量。起始模擬輸入數和模擬輸入數字段的高位字節作為這些字段中的***個字節發送。低位字節是這些字段中的***個字節。答復：? 字節計數是從2到250（含）的二進制數。它是正常響應中字節計數之后和錯誤檢查之前的字節數。注意，字節計數等于響應中返回的模擬輸入數的兩倍。設置250字節（125）的模擬輸入，以便整個響應可以適合一個256字節的數據塊。? 模擬輸入在數據字段中按數字順序返回，在數據字段的前兩個字節中的模擬輸入數量***少，在***兩個字節，模擬輸入數量***多。數據字段中***個模擬輸入的數字等于起始模擬輸入數字加1。在每個模擬輸入的低位字節之前發送高位字節。

                         產品英文詳情料:

The Number Of Analog Inputs value is two bytes in length. It must contain a value from 1 to 125 inclusive. The sum of the Starting Analog Input value and the Number Of Analog Inputs value must be less than or equal to the highest analog input number available in the at-attached CPU. The high order byte of the Starting Analog Input Number and Number of Analog Inputs fields is sent as the first byte in each of these fields. The low order byte is the second byte in each of these fields. Response: ? The Byte Count is a binary number from 2 to 250 inclusive. It is the number of bytes in the normal response following the byte count and preceding the error check. Note that the Byte Count is equal to two times the number of analog inputs returned in the response. A maximum of 250 bytes (125) analog inputs is set so that the entire response can fit into one 256-byte data block. ? The analog inputs are returned in the Data field in order of number with the lowest number analog input in the first two bytes and the highest number analog input in the last two bytes of the Data field. The number of the First Analog Input in the Data field is equal to the Starting analog input number plus one. The high order byte is sent before the low order byte of each analog input.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。