鋁掛片吊頂?shù)氖┕すに嚕?/span>

The construction process of aluminum screen ceiling:

1、首先應在墻面彈出標高線，在墻的兩邊固定壓線片用水泥釘與墻面固定牢固，依據設計標高，沿墻面四周彈線作為頂棚安裝的標準線，其水平允許偏差5mm。

First of all ,We should be activated in the walls on both sides of the standard high, and fix line wall with cement and wall nail fixation.According to the design elevation, along the wall around the bomb line as a standard line ceiling of installation, the level of allowable deviation is 5mm.

2、遇槽井吊頂時，應從下固定壓條，陰陽角用壓條連接。注意預留出照明線的出口。吊頂面積大時應在中間鋪設龍骨。

2, when meet well ceiling ,it should be fixed down the layering ，the layering use to connect the Yin and yang angle . Pay attention to set aside as export lines. When the ceiling area is large, the keel should be laid in the middle.

3、吊點間距應當復驗，一般不上人吊頂為1200-1500mm，上人吊頂為900-1200。

 Hanging point spacing should be re examined.Generally no people on the ceiling that is 1200-1500mm, and people on the ceiling that is 900-1200.

4、面板安裝前應對安裝完的龍骨和面板板材進行檢查，符合要求后再進行安裝。

Before the panel is installed, the installation of the keel and panel boards shall be checked and the installation shall be carried out after the requirements have been met.

 佛山建威鋁掛片廠家是專業生產和銷售鋁掛片，如果您想了解更多鋁掛片產品，請點擊登錄建威官網：http://www.fsjwlth.com或咨詢我們的業務經理羅小姐，她的電話/微信：13924844954

Foshan Jian Wei aluminum screen  factory is specialized in the production and sale aluminum screen , if you want to know more about the aluminum screen production, please click on the website: http://www.fsjwlth.com.Or consult our business manager, Miss Luo, on her phone / WeChat: 13924844954