SCM系列鐵線調直切斷機

SCM Series Automatic Wire Straightening and CuttingMachine

設備主要特點

1.該設備主要用于將圓或扁的鐵線，不銹鋼線，鍍鋅線，鋁線，銅線等自動調直，按照設定長度，自動切斷。

2.有傳統機械式和數控液壓式兩種。

3.機械式鐵線調直切斷機，手動設定調直切斷長度，操作與維護都比較簡單。主要是用于調直切斷直徑小于10毫米,大切斷長度小于2米的普通鐵線。

4.數控液壓式鐵線調直切斷機，加工性能較強，幾乎可以加工任何直徑，任何長度的鐵線，自動化程度高，數控設定調直切斷長度，并設有安全裝置，自動計數停機系統。主要用于調直切斷建筑用冷軋螺紋鋼筋、熱軋鋼筋、熱軋圓鋼及冷軋圓鋼等。

Main Application and Characteristic

1.The equipment is mainly used forautomatically straighten round or flat wire, stainless steel wire, galvanizedwire, aluminum wire, copper wire,and cut automatically according to the presetlength.

2.There are two kinds of models:TraditionalMechanical Model and Numerical Control Hydraulic Model.

3.“Traditional Mechanical Model AutomaticaWire Straightening and Cutting Machine”,need to set the straightening andcutting length manually,then the machine will do that automatically.

Operation and maintenance are simple. It ismainly used for straightening and cutting the wire with diameter less than 10 mm and the maximum cutting length is lessthan 2 metres.

4.“Numerical Control Hydraulic Model AutomaticaWire Straightening and Cutting machine”,processing performance is strong,almost can process any diameter, any length of wire, high degree of automation,automaticallyset straightening and cutting length,adopted with the safety device and automaticcounting & stop system.Mainly used for straightening and cutting buildingcold-rolled steel wire and rebar, hot-rolled steel wire, hot-rolled round steelwire and cold-rolled steel bar etc..

技術參數

Technical Parameter

可以根據客戶要求,特殊定做各種調直切斷機。

According to customer requirements, can customizedproduce special kinds of straightening and cutting machine.